ROADSTER BODY & CHASSIS KIT

Questions & Answers about this ad

Question:

Hello, I'm interested in purchasing a couple of the 63 vette kits. Do you have any other information and pictures of exactly what comes with the kit and what else you have available that will be needed to complete the roller. Thanks -Kevin Yoon

Answer:

Yes send me your fax # On [2007-09-01 18:01:37] kevin8296 wrote: > Hello, I'm interested in purchasing a couple of the 63 vette kits. Do you have any other information and pictures of exactly what comes with the kit and what else you have available that will be needed to complete the roller. Thanks -Kevin Yoon

Questions & Answers about this ad

Question:

Charlie Got your fax on the pkg roller options looks good. On a turn key what motor and trans options have you been useing? Just thinking because I am in Hawaii I got to ship everything here I might as well look at doing it complete if I am going to do it and ship all at once. Also have you sent any cars to the west coast for shipping, just thinking about transport. What is the nearest major airport near you? If I do this I might want to fly up to sit in it and get some pointer from you on set up. Thanks Mark

Answer:

How much power do you want 502,540,555,565,572,598,632,800hpto1300hp I can get power from 5 dif engine builders 13500.0 to 40000.00 good trans 3500 to 4500 need sum idea what you want I am 25 miles to DFW AIR PORT 300 miles from port at Houston 1500 port at cal cal me 817 253 5796 On [2007-09-10 02:01:55] Kixgiggles1 wrote: > Charlie > > Got your fax on the pkg roller options looks good. > On a turn key what motor and trans options have you been useing? Just thinking because I am in Hawaii I got to ship everything here I might as well look at doing it complete if I am going to do it and ship all at once. > Also have you sent any cars to the west coast for shipping, just thinking about transport. > What is the nearest major airport near you? If I do this I might want to fly up to sit in it and get some pointer from you on set up. > > Thanks > Mark

Questions & Answers about this ad

Question:

Hi this is john Troxell what is the best you can do.

Answer:

whats are you asking On [2007-09-11 15:09:59] troxell88 wrote: > Hi this is john Troxell what is the best you can do.

Questions & Answers about this ad

Question:

I just picked up a nice 598 today and should be an honest 1000hp motor, Hogan tunnel intake with twin 1050's, AFR worked heads, only the best bottom end goodies and dry sump. So I am looking at doing a complete Roller with Trans in so all I need to do is drop in the motor, Plumb, wire and fire. I will call again in the morning whe I get to my office. Thanks Mark On [2007-09-11 15:24:57] cstewart wrote: > How much power do you want 502,540,555,565,572,598,632,800hpto1300hp I can get power from 5 dif engine builders 13500.0 to 40000.00 good trans > 3500 to 4500 need sum idea what you want > I am 25 miles to DFW AIR PORT 300 miles > from port at Houston 1500 port at cal > cal me 817 253 5796 > > On [2007-09-10 02:01:55] Kixgiggles1 wrote: > > Charlie > > > > Got your fax on the pkg roller options looks good. > > On a turn key what motor and trans options have you been useing? Just thinking because I am in Hawaii I got to ship everything here I might as well look at doing it complete if I am going to do it and ship all at once. > > Also have you sent any cars to the west coast for shipping, just thinking about transport. > > What is the nearest major airport near you? If I do this I might want to fly up to sit in it and get some pointer from you on set up. > > > > Thanks > > Mark >

Answer:

sounds great Charlie Stewart 817 253 5796 On [2007-09-12 04:35:07] Kixgiggles1 wrote: > I just picked up a nice 598 today and should be an honest 1000hp motor, Hogan tunnel intake with twin 1050's, AFR worked heads, only the best bottom end goodies and dry sump. > So I am looking at doing a complete Roller with Trans in so all I need to do is drop in the motor, Plumb, wire and fire. > I will call again in the morning whe I get to my office. > > Thanks > Mark > > On [2007-09-11 15:24:57] cstewart wrote: > > How much power do you want 502,540,555,565,572,598,632,800hpto1300hp I can get power from 5 dif engine builders 13500.0 to 40000.00 good trans > > 3500 to 4500 need sum idea what you want > > I am 25 miles to DFW AIR PORT 300 miles > > from port at Houston 1500 port at cal > > cal me 817 253 5796 > > > > On [2007-09-10 02:01:55] Kixgiggles1 wrote: > > > Charlie > > > > > > Got your fax on the pkg roller options looks good. > > > On a turn key what motor and trans options have you been useing? Just thinking because I am in Hawaii I got to ship everything here I might as well look at doing it complete if I am going to do it and ship all at once. > > > Also have you sent any cars to the west coast for shipping, just thinking about transport. > > > What is the nearest major airport near you? If I do this I might want to fly up to sit in it and get some pointer from you on set up. > > > > > > Thanks > > > Mark > > >

Questions & Answers about this ad

Question:

The picture shows the complete roll cage, is it included in the base price? How long does it take for assembly?

Answer:

The chassis is complete 100% welded what you see in picture is what u get unless you want more I can fax you a complete option sheet if you want send me fax # On [2007-11-20 15:58:37] dragmag wrote: > The picture shows the complete roll cage, is it included in the base price? How long does it take for assembly?

Questions & Answers about this ad

Question:

Do you have an internet website? Regards, Nick

Answer:

no under construction call me If I can help 817 253 5796 On [2008-01-31 16:10:10] nickthap wrote: > Do you have an internet website? > > Regards, > Nick

Questions & Answers about this ad

Question:

Do you have an internet website? Regards, Nick

Answer:

no under constrution On [2008-01-31 16:10:10] nickthap wrote: > Do you have an internet website? > > Regards, > Nick

Questions & Answers about this ad

Question:

Do you have a chassis kit for a 33 Willys. I think the wheelbase is 97 inches. Bob

Answer:

On [2008-02-11 20:37:02] bob1320 wrote: > Do you have a chassis kit for a 33 Willys. I think the wheelbase is 97 inches. > > Bob

Questions & Answers about this ad

Question:

Do you have a chassis kit for a 33 Willys. I think the wheelbase is 97 inches. Bob

Answer:

no I only build 63 vette & a few slip joint Dragsters On [2008-02-11 20:37:02] bob1320 wrote: > Do you have a chassis kit for a 33 Willys. I think the wheelbase is 97 inches. > > Bob

Questions & Answers about this ad

Question:

Hi do you still have the kit ? Do you have a list of other parts that you need and who to buy from. thanks Lee @ wwwEngineDiapers.net

Answer:

Yes I have kits & option sheet you can pick from or do it yourself On [2008-02-18 06:00:58] leedavidson wrote: > Hi do you still have the kit ? Do you have a list of other parts that you need and who to buy from. thanks Lee @ wwwEngineDiapers.net

Questions & Answers about this ad

Question:

Hi you can e-mail that info to me or you can send it to me what would be the best. 805-610-1340 thanks Lee On [2008-02-18 22:26:32] cstewart wrote: > Yes I have kits & option sheet you can pick from or do it yourself > > On [2008-02-18 06:00:58] leedavidson wrote: > > Hi do you still have the kit ? Do you have a list of other parts that you need and who to buy from. thanks Lee @ wwwEngineDiapers.net >

Answer:

give me email or fax # On [2008-02-18 23:50:12] leedavidson wrote: > Hi you can e-mail that info to me or you can send it to me what would be the best. 805-610-1340 thanks Lee > > On [2008-02-18 22:26:32] cstewart wrote: > > Yes I have kits & option sheet you can pick from or do it yourself > > > > On [2008-02-18 06:00:58] leedavidson wrote: > > > Hi do you still have the kit ? Do you have a list of other parts that you need and who to buy from. thanks Lee @ wwwEngineDiapers.net > > >

Questions & Answers about this ad

Question:

how much for one welded and powdercoated and tin work done ready to bolt my struts on

Answer:

On [2008-04-01 11:05:45] miked9449 wrote: > how much for one welded and powdercoated and tin work done ready to bolt my struts on give me your fax # I can send you a option list

Questions & Answers about this ad

Question:

do u no where i can find a body like that for my roadster

Answer:

Yes I have bodys in stock 3500.00 add 250 for coler 817 253 5796 On [2008-05-05 21:23:29] dss5401 wrote: > do u no where i can find a body like that for my roadster

Questions & Answers about this ad

Question:

Does this kit come with a rearend? Blake

Answer:

No, I can send you option sheet need your email or fax Charlie Stewart RACE CARS 817 253 5796 On [2008-05-26 09:55:09] racepartsforsale wrote: > Does this kit come with a rearend? > Blake